Commit b33f4284 authored by enfo's avatar enfo

Added additional reset caps, changed 0R pad

parent 59fa22f1
This diff is collapsed.
......@@ -7260,6 +7260,83 @@ Source: http://www.murata.com .. GRM43DR72E224KW01.pdf</description>
</deviceset>
</devicesets>
</library>
<library name="everykey">
<description>Meine Komponenten - alles Zeug, was ich benutze, kommt hier rein. Und wird geändert, sodass alles konsistent ist und funktioniert.</description>
<packages>
<package name="1X02_OVAL">
<description>&lt;b&gt;PIN HEADER&lt;/b&gt;</description>
<wire x1="-2.54" y1="0.635" x2="-2.54" y2="-0.635" width="0.1524" layer="51"/>
<pad name="1" x="-1.27" y="0" drill="1" shape="long" rot="R90"/>
<pad name="2" x="1.27" y="0" drill="1" shape="long" rot="R90"/>
<text x="-2.6162" y="1.8288" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-2.54" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.524" y1="-0.254" x2="-1.016" y2="0.254" layer="51"/>
<rectangle x1="1.016" y1="-0.254" x2="1.524" y2="0.254" layer="51"/>
</package>
<package name="0603_SOLDERJUMPER_OPEN">
<description>A pad pair, normally disconnected with a small gap, that can be bridged using solder. Also fits a 0603 component, so it can also be closed with a 0R resistor.</description>
<smd name="1" x="-0.6" y="0" dx="1" dy="0.86" layer="1" cream="no"/>
<smd name="2" x="0.6" y="0" dx="1" dy="0.86" layer="1" cream="no"/>
<text x="1.778" y="0.254" size="0.5" layer="25" font="vector">&gt;NAME</text>
<text x="1.778" y="-0.635" size="0.5" layer="27" font="vector">&gt;VALUE</text>
</package>
<package name="0603_SOLDERJUMPER_CLOSED">
<description>A pad pair with a small gap, normally connected with a thin trace. It can be disconnected by cutting the trace with a knife. The gab can be reconnected by bridging with solder. Also fits a 0603 component, so it can also be closed with a 0R resistor.</description>
<smd name="1" x="-0.6" y="0" dx="1" dy="0.86" layer="1" cream="no"/>
<smd name="2" x="0.6" y="0" dx="1" dy="0.86" layer="1" cream="no"/>
<text x="1.778" y="0.254" size="0.5" layer="25" font="vector">&gt;NAME</text>
<text x="1.778" y="-0.635" size="0.5" layer="27" font="vector">&gt;VALUE</text>
<rectangle x1="-0.1" y1="-0.1" x2="0.1" y2="0.1" layer="1"/>
</package>
</packages>
<symbols>
<symbol name="JUMPER">
<description>Small symbol for jumper</description>
<pin name="P$1" x="-5.08" y="0" visible="off" length="short"/>
<pin name="P$2" x="5.08" y="0" visible="off" length="short" rot="R180"/>
<circle x="-2.032" y="0" radius="0.508" width="0.254" layer="94"/>
<circle x="-2.032" y="0" radius="0.508" width="0.254" layer="94"/>
<circle x="2.032" y="0" radius="0.508" width="0.254" layer="94"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="JUMPER">
<description>A jumper</description>
<gates>
<gate name="G$1" symbol="JUMPER" x="0" y="0"/>
</gates>
<devices>
<device name="TH" package="1X02_OVAL">
<connects>
<connect gate="G$1" pin="P$1" pad="1"/>
<connect gate="G$1" pin="P$2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="SOLDER_OPEN" package="0603_SOLDERJUMPER_OPEN">
<connects>
<connect gate="G$1" pin="P$1" pad="1"/>
<connect gate="G$1" pin="P$2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="SOLDER_CLOSED" package="0603_SOLDERJUMPER_CLOSED">
<connects>
<connect gate="G$1" pin="P$1" pad="1"/>
<connect gate="G$1" pin="P$2" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
</libraries>
<attributes>
</attributes>
......@@ -7284,9 +7361,10 @@ Source: http://www.murata.com .. GRM43DR72E224KW01.pdf</description>
<part name="C3" library="resistor" library_urn="urn:adsk.eagle:library:348" deviceset="C-US" device="C0603" package3d_urn="urn:adsk.eagle:package:26138/1"/>
<part name="FRAME1" library="frames" library_urn="urn:adsk.eagle:library:229" deviceset="DOCFIELD" device=""/>
<part name="JST-SM10B-GHDS" library="enfolib" deviceset="HEADER10" device="" value="JST-SM10B-GHDS"/>
<part name="J1" library="resistor" library_urn="urn:adsk.eagle:library:348" deviceset="R-US_" device="R0603" package3d_urn="urn:adsk.eagle:package:26057/1" value="0R"/>
<part name="U$1" library="enfolib" deviceset="CONN-4" device=""/>
<part name="JST-SM10B-GHDS1" library="enfolib" deviceset="HEADER10" device="" value="JST-SM10B-GHDS"/>
<part name="J1" library="everykey" deviceset="JUMPER" device="SOLDER_OPEN"/>
<part name="C4" library="resistor" library_urn="urn:adsk.eagle:library:348" deviceset="C-US" device="C0603" package3d_urn="urn:adsk.eagle:package:26138/1"/>
</parts>
<sheets>
<sheet>
......@@ -7304,9 +7382,10 @@ NTNU 2017</text>
<instance part="C3" gate="G$1" x="33.02" y="60.96"/>
<instance part="FRAME1" gate="G$1" x="101.6" y="5.08"/>
<instance part="JST-SM10B-GHDS" gate="G$1" x="129.54" y="66.04"/>
<instance part="J1" gate="G$1" x="27.94" y="88.9" rot="R90"/>
<instance part="U$1" gate="B" x="129.54" y="91.44" rot="R180"/>
<instance part="JST-SM10B-GHDS1" gate="G$1" x="175.26" y="66.04"/>
<instance part="J1" gate="G$1" x="22.86" y="88.9" rot="R90"/>
<instance part="C4" gate="G$1" x="45.72" y="60.96"/>
</instances>
<busses>
</busses>
......@@ -7332,9 +7411,10 @@ NTNU 2017</text>
<junction x="25.4" y="78.74"/>
<wire x1="33.02" y1="86.36" x2="38.1" y2="86.36" width="0.1524" layer="91"/>
<wire x1="38.1" y1="86.36" x2="38.1" y2="78.74" width="0.1524" layer="91"/>
<pinref part="J1" gate="G$1" pin="1"/>
<wire x1="33.02" y1="86.36" x2="33.02" y2="83.82" width="0.1524" layer="91"/>
<wire x1="33.02" y1="83.82" x2="27.94" y2="83.82" width="0.1524" layer="91"/>
<pinref part="J1" gate="G$1" pin="P$1"/>
<wire x1="27.94" y1="83.82" x2="22.86" y2="83.82" width="0.1524" layer="91"/>
</segment>
<segment>
<pinref part="JST-SM10B-GHDS" gate="G$1" pin="10"/>
......@@ -7372,9 +7452,12 @@ NTNU 2017</text>
<junction x="25.4" y="55.88"/>
<pinref part="C3" gate="G$1" pin="2"/>
<junction x="33.02" y="55.88"/>
<wire x1="33.02" y1="55.88" x2="53.34" y2="55.88" width="0.1524" layer="91"/>
<wire x1="33.02" y1="55.88" x2="45.72" y2="55.88" width="0.1524" layer="91"/>
<wire x1="45.72" y1="55.88" x2="53.34" y2="55.88" width="0.1524" layer="91"/>
<wire x1="53.34" y1="55.88" x2="53.34" y2="58.42" width="0.1524" layer="91"/>
<wire x1="53.34" y1="58.42" x2="58.42" y2="58.42" width="0.1524" layer="91"/>
<pinref part="C4" gate="G$1" pin="2"/>
<junction x="45.72" y="55.88"/>
</segment>
<segment>
<pinref part="JST-SM10B-GHDS" gate="G$1" pin="4"/>
......@@ -7421,9 +7504,10 @@ NTNU 2017</text>
<label x="48.26" y="88.9" size="1.778" layer="95"/>
<wire x1="45.72" y1="88.9" x2="48.26" y2="88.9" width="0.1524" layer="91"/>
<junction x="45.72" y="88.9"/>
<pinref part="J1" gate="G$1" pin="2"/>
<wire x1="27.94" y1="93.98" x2="33.02" y2="93.98" width="0.1524" layer="91"/>
<wire x1="33.02" y1="93.98" x2="33.02" y2="88.9" width="0.1524" layer="91"/>
<pinref part="J1" gate="G$1" pin="P$2"/>
<wire x1="27.94" y1="93.98" x2="22.86" y2="93.98" width="0.1524" layer="91"/>
</segment>
</net>
<net name="TRIG" class="0">
......@@ -7556,13 +7640,16 @@ NTNU 2017</text>
<segment>
<pinref part="R1" gate="G$1" pin="1"/>
<pinref part="CLM-112-02-G-D-A" gate="G$1" pin="_RST"/>
<wire x1="40.64" y1="63.5" x2="53.34" y2="63.5" width="0.1524" layer="91"/>
<wire x1="40.64" y1="63.5" x2="45.72" y2="63.5" width="0.1524" layer="91"/>
<label x="53.34" y="71.12" size="1.778" layer="95" rot="R180"/>
<pinref part="C3" gate="G$1" pin="1"/>
<wire x1="45.72" y1="63.5" x2="53.34" y2="63.5" width="0.1524" layer="91"/>
<wire x1="33.02" y1="63.5" x2="40.64" y2="63.5" width="0.1524" layer="91"/>
<junction x="40.64" y="63.5"/>
<wire x1="53.34" y1="63.5" x2="53.34" y2="71.12" width="0.1524" layer="91"/>
<wire x1="53.34" y1="71.12" x2="58.42" y2="71.12" width="0.1524" layer="91"/>
<pinref part="C4" gate="G$1" pin="1"/>
<junction x="45.72" y="63.5"/>
</segment>
</net>
</nets>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment